diff options
Diffstat (limited to 'doc/bird.sgml')
-rw-r--r-- | doc/bird.sgml | 24 |
1 files changed, 23 insertions, 1 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml index 1d5ae056..326fc7a8 100644 --- a/doc/bird.sgml +++ b/doc/bird.sgml @@ -684,6 +684,21 @@ to set options. limit to the settle time from the initial ROA table change even if there are consecutive updates gradually renewing the settle time. Default: 20 s. + + <tag><label id="rtable-gc-threshold">gc threshold <m/number/</tag> + Specify a minimum amount of removed networks that triggers a garbage + collection (GC) cycle. Default: 1000. + + <tag><label id="rtable-gc-period">gc period <m/time/</tag> + Specify a period of time between consecutive GC cycles. When there is a + significant amount of route withdraws, GC cycles are executed repeatedly + with given period time (with some random factor). When there is just + small amount of changes, GC cycles are not executed. In extensive route + server setups, running GC on hundreds of full BGP routing tables can + take significant amount of time, therefore they should use higher GC + periods. Default: adaptive, based on number of routing tables in the + configuration. From 10 s (with <= 25 routing tables) up to 600 s (with + >= 1500 routing tables). </descrip> @@ -2153,6 +2168,13 @@ protocol bfd [<name>] { to configure separate BFD protocol instances for IPv4 and for IPv6 sessions. + <tag><label id="bfd-strict-bind">strict bind <m/switch/</tag> + Specify whether each BFD interface should use a separate listening + socket bound to its local address, or just use a shared listening socket + accepting all addresses. Binding to a specific address could be useful + in cases like running multiple BIRD instances on a machine, each + handling a different set of interfaces. Default: disabled. + <tag><label id="bfd-iface">interface <m/pattern/ [, <m/.../] { <m/options/ }</tag> Interface definitions allow to specify options for sessions associated with such interfaces and also may contain interface specific options. @@ -5244,7 +5266,7 @@ Note that for negated matches, value must be either zero or equal to bitmask <cf>port 1..1023,1194,3306</cf>). <tag><label id="flow-dport">dport <m/numbers-match/</tag> - Set a mating destination port numbers (e.g. <cf>dport 49151</cf>). + Set a matching destination port numbers (e.g. <cf>dport 49151</cf>). <tag><label id="flow-sport">sport <m/numbers-match/</tag> Set a matching source port numbers (e.g. <cf>sport = 0</cf>). |