Add support for 3DES CBCM mode.

3 files changed, 251 insertions, 3 deletions

diff --git a/crypto/des/Makefile.ssl b/crypto/des/Makefile.ssl
index 4ec17d1cdd..cbb6bfb992 100644
--- a/crypto/des/Makefile.ssl
+++ b/crypto/des/Makefile.ssl
@@ -30,14 +30,15 @@ LIBSRC=	cbc_cksm.c cbc_enc.c  cfb64enc.c cfb_enc.c  \
 	qud_cksm.c rand_key.c read_pwd.c rpc_enc.c  set_key.c  \
 	des_enc.c fcrypt_b.c read2pwd.c \
 	fcrypt.c xcbc_enc.c \
-	str2key.c  cfb64ede.c ofb64ede.c supp.c
+	str2key.c  cfb64ede.c ofb64ede.c supp.c ede_cbcm_enc.c
 
 LIBOBJ= set_key.o  ecb_enc.o  cbc_enc.o \
 	ecb3_enc.o cfb64enc.o cfb64ede.o cfb_enc.o  ofb64ede.o \
 	enc_read.o enc_writ.o ofb64enc.o \
 	ofb_enc.o  str2key.o  pcbc_enc.o qud_cksm.o rand_key.o \
 	${DES_ENC} read2pwd.o \
-	fcrypt.o xcbc_enc.o read_pwd.o rpc_enc.o  cbc_cksm.o supp.o
+	fcrypt.o xcbc_enc.o read_pwd.o rpc_enc.o  cbc_cksm.o supp.o \
+	ede_cbcm_enc.o
 
 SRC= $(LIBSRC)
 
diff --git a/crypto/des/destest.c b/crypto/des/destest.c
index 5700608b9b..d915c7a22f 100644
--- a/crypto/des/destest.c
+++ b/crypto/des/destest.c
@@ -318,7 +318,7 @@ int argc;
 char *argv[];
 	{
 	int i,j,err=0;
-	des_cblock in,out,outin,iv3;
+	des_cblock in,out,outin,iv3,iv2;
 	des_key_schedule ks,ks2,ks3;
 	unsigned char cbc_in[40];
 	unsigned char cbc_out[40];
@@ -328,6 +328,58 @@ char *argv[];
 	int num;
 	char *str;
 
+	printf("Doing cbcm\n");
+	if ((j=des_key_sched((C_Block *)cbc_key,ks)) != 0)
+		{
+		printf("Key error %d\n",j);
+		err=1;
+		}
+	if ((j=des_key_sched((C_Block *)cbc2_key,ks2)) != 0)
+		{
+		printf("Key error %d\n",j);
+		err=1;
+		}
+	if ((j=des_key_sched((C_Block *)cbc3_key,ks3)) != 0)
+		{
+		printf("Key error %d\n",j);
+		err=1;
+		}
+	memset(cbc_out,0,40);
+	memset(cbc_in,0,40);
+	i=strlen((char *)cbc_data)+1;
+	/* i=((i+7)/8)*8; */
+	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
+	memset(iv2,'\0',sizeof iv2);
+
+	des_ede3_cbcm_encrypt(cbc_data,cbc_out,16L,ks,ks2,ks3,iv3,iv2,
+			      DES_ENCRYPT);
+	des_ede3_cbcm_encrypt(&cbc_data[16],&cbc_out[16],i-16,ks,ks2,ks3,
+			      iv3,iv2,DES_ENCRYPT);
+	/*	if (memcmp(cbc_out,cbc3_ok,
+		(unsigned int)(strlen((char *)cbc_data)+1+7)/8*8) != 0)
+		{
+		printf("des_ede3_cbc_encrypt encrypt error\n");
+		err=1;
+		}
+	*/
+	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
+	memset(iv2,'\0',sizeof iv2);
+	des_ede3_cbcm_encrypt(cbc_out,cbc_in,i,ks,ks2,ks3,iv3,iv2,DES_DECRYPT);
+	if (memcmp(cbc_in,cbc_data,strlen(cbc_data)+1) != 0)
+		{
+		int n;
+
+		printf("des_ede3_cbcm_encrypt decrypt error\n");
+		for(n=0 ; n < i ; ++n)
+		    printf(" %02x",cbc_data[n]);
+		printf("\n");
+		for(n=0 ; n < i ; ++n)
+		    printf(" %02x",cbc_in[n]);
+		printf("\n");
+		err=1;
+		}
+
+
 	printf("Doing ecb\n");
 	for (i=0; i<NUM_TESTS; i++)
 		{
diff --git a/crypto/des/ede_cbcm_enc.c b/crypto/des/ede_cbcm_enc.c
new file mode 100644
index 0000000000..a40b1d6073
--- /dev/null
+++ b/crypto/des/ede_cbcm_enc.c
@@ -0,0 +1,195 @@
+/* ede_cbcm_enc.c */
+/* Written by Ben Laurie <ben@algroup.co.uk> for the OpenSSL
+ * project 13 Feb 1999.
+ */
+/* ====================================================================
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+/*
+
+This is an implementation of Triple DES Cipher Block Chaining with Output
+Feedback Masking, by Coppersmith, Johnson and Matyas, (IBM and Certicom).
+
+*/
+
+#include "des_locl.h"
+
+void des_ede3_cbcm_encrypt(const unsigned char *input,unsigned char *output,
+			   long length,
+			   des_key_schedule ks1,des_key_schedule ks2,
+			   des_key_schedule ks3,
+			   des_cblock ivec1,des_cblock ivec2,
+			   int enc)
+    {
+    register DES_LONG tin0,tin1;
+    register DES_LONG tout0,tout1,xor0,xor1,m0,m1;
+    register unsigned char *in,*out;
+    register long l=length;
+    DES_LONG tin[2];
+    unsigned char *iv1,*iv2;
+
+    in=(unsigned char *)input;
+    out=(unsigned char *)output;
+    iv1=(unsigned char *)ivec1;
+    iv2=(unsigned char *)ivec2;
+
+    if (enc)
+	{
+	c2l(iv1,m0);
+	c2l(iv1,m1);
+	c2l(iv2,tout0);
+	c2l(iv2,tout1);
+	for (l-=8; l>=-7; l-=8)
+	    {
+	    tin[0]=m0;
+	    tin[1]=m1;
+	    des_encrypt(tin,ks3,1);
+	    m0=tin[0];
+	    m1=tin[1];
+
+	    if(l < 0)
+		{
+		c2ln(in,tin0,tin1,l+8);
+		}
+	    else
+		{
+		c2l(in,tin0);
+		c2l(in,tin1);
+		}
+	    tin0^=tout0;
+	    tin1^=tout1;
+
+	    tin[0]=tin0;
+	    tin[1]=tin1;
+	    des_encrypt(tin,ks1,1);
+	    tin[0]^=m0;
+	    tin[1]^=m1;
+	    des_encrypt(tin,ks2,0);
+	    tin[0]^=m0;
+	    tin[1]^=m1;
+	    des_encrypt(tin,ks1,1);
+	    tout0=tin[0];
+	    tout1=tin[1];
+
+	    l2c(tout0,out);
+	    l2c(tout1,out);
+	    }
+	iv1=(unsigned char *)ivec1;
+	l2c(m0,iv1);
+	l2c(m1,iv1);
+
+	iv2=(unsigned char *)ivec2;
+	l2c(tout0,iv2);
+	l2c(tout1,iv2);
+	}
+    else
+	{
+	register DES_LONG t0,t1;
+
+	c2l(iv1,m0);
+	c2l(iv1,m1);
+	c2l(iv2,xor0);
+	c2l(iv2,xor1);
+	for (l-=8; l>=-7; l-=8)
+	    {
+	    tin[0]=m0;
+	    tin[1]=m1;
+	    des_encrypt(tin,ks3,1);
+	    m0=tin[0];
+	    m1=tin[1];
+
+	    c2l(in,tin0);
+	    c2l(in,tin1);
+
+	    t0=tin0;
+	    t1=tin1;
+
+	    tin[0]=tin0;
+	    tin[1]=tin1;
+	    des_encrypt(tin,ks1,0);
+	    tin[0]^=m0;
+	    tin[1]^=m1;
+	    des_encrypt(tin,ks2,1);
+	    tin[0]^=m0;
+	    tin[1]^=m1;
+	    des_encrypt(tin,ks1,0);
+	    tout0=tin[0];
+	    tout1=tin[1];
+
+	    tout0^=xor0;
+	    tout1^=xor1;
+	    if(l < 0)
+		{
+		l2cn(tout0,tout1,out,l+8);
+		}
+	    else
+		{
+		l2c(tout0,out);
+		l2c(tout1,out);
+		}
+	    xor0=t0;
+	    xor1=t1;
+	    }
+
+	iv1=(unsigned char *)ivec1;
+	l2c(m0,iv1);
+	l2c(m1,iv1);
+
+	iv2=(unsigned char *)ivec2;
+	l2c(xor0,iv2);
+	l2c(xor1,iv2);
+	}
+    tin0=tin1=tout0=tout1=xor0=xor1=0;
+    tin[0]=tin[1]=0;
+    }