perlasm: fix symptom-less bugs, missing semicolons and 'my' declarations.

11 files changed, 37 insertions, 37 deletions

diff --git a/crypto/aes/asm/aes-586.pl b/crypto/aes/asm/aes-586.pl
index aab40e6f1c..406cd222f5 100755
--- a/crypto/aes/asm/aes-586.pl
+++ b/crypto/aes/asm/aes-586.pl
@@ -242,7 +242,7 @@ $vertical_spin=0;	# shift "verticaly" defaults to 0, because of
 
 sub encvert()
 { my ($te,@s) = @_;
-  my $v0 = $acc, $v1 = $key;
+  my ($v0,$v1) = ($acc,$key);
 
 	&mov	($v0,$s[3]);				# copy s3
 	&mov	(&DWP(4,"esp"),$s[2]);			# save s2
@@ -299,7 +299,7 @@ sub encvert()
 # Another experimental routine, which features "horizontal spin," but
 # eliminates one reference to stack. Strangely enough runs slower...
 sub enchoriz()
-{ my $v0 = $key, $v1 = $acc;
+{ my ($v0,$v1) = ($key,$acc);
 
 	&movz	($v0,&LB($s0));			#  3, 2, 1, 0*
 	&rotr	($s2,8);			#  8,11,10, 9
@@ -427,7 +427,7 @@ sub sse_encbody()
 ######################################################################
 
 sub enccompact()
-{ my $Fn = mov;
+{ my $Fn = \&mov;
   while ($#_>5) { pop(@_); $Fn=sub{}; }
   my ($i,$te,@s)=@_;
   my $tmp = $key;
@@ -489,7 +489,7 @@ sub enctransform()
 
 	&xor	($s[$i],$acc);	# r0 ^ r2
 	&rotl	($s[$i],24);
-	&xor	($s[$i],$acc)	# ROTATE(r2^r0,24) ^ r2
+	&xor	($s[$i],$acc);	# ROTATE(r2^r0,24) ^ r2
 	&rotr	($tmp,16);
 	&xor	($s[$i],$tmp);
 	&rotr	($tmp,8);
@@ -1222,7 +1222,7 @@ sub enclast()
 ######################################################################
 
 sub deccompact()
-{ my $Fn = mov;
+{ my $Fn = \&mov;
   while ($#_>5) { pop(@_); $Fn=sub{}; }
   my ($i,$td,@s)=@_;
   my $tmp = $key;
@@ -2181,8 +2181,8 @@ my $mark=&DWP(76+240,"esp");	# copy of aes_key->rounds
 	&mov	("ecx",240/4);
 	&xor	("eax","eax");
 	&align	(4);
-	&data_word(0xABF3F689);	# rep stosd
-	&set_label("skip_ezero")
+	&data_word(0xABF3F689);		# rep stosd
+	&set_label("skip_ezero");
 	&mov	("esp",$_esp);
 	&popf	();
     &set_label("drop_out");
@@ -2301,8 +2301,8 @@ my $mark=&DWP(76+240,"esp");	# copy of aes_key->rounds
 	&mov	("ecx",240/4);
 	&xor	("eax","eax");
 	&align	(4);
-	&data_word(0xABF3F689);	# rep stosd
-	&set_label("skip_dzero")
+	&data_word(0xABF3F689);		# rep stosd
+	&set_label("skip_dzero");
 	&mov	("esp",$_esp);
 	&popf	();
 	&function_end_A();
diff --git a/crypto/aes/asm/aesni-x86.pl b/crypto/aes/asm/aesni-x86.pl
index 3dc345b585..14ff2602ed 100644
--- a/crypto/aes/asm/aesni-x86.pl
+++ b/crypto/aes/asm/aesni-x86.pl
@@ -54,8 +54,8 @@ require "x86asm.pl";
 
 &asm_init($ARGV[0],$0);
 
-if ($PREFIX eq "aesni")	{ $movekey=*movups; }
-else			{ $movekey=*movups; }
+if ($PREFIX eq "aesni")	{ $movekey=\&movups; }
+else			{ $movekey=\&movups; }
 
 $len="eax";
 $rounds="ecx";
@@ -1816,7 +1816,7 @@ if ($PREFIX eq "aesni") {
 	&movups	(&QWP(0x10,$out),$inout1);
 	&lea	($inp,&DWP(0x60,$inp));
 	&movups	(&QWP(0x20,$out),$inout2);
-	&mov	($rounds,$rounds_)		# restore $rounds
+	&mov	($rounds,$rounds_);		# restore $rounds
 	&movups	(&QWP(0x30,$out),$inout3);
 	&mov	($key,$key_);			# restore $key
 	&movups	(&QWP(0x40,$out),$inout4);
@@ -2015,7 +2015,7 @@ if ($PREFIX eq "aesni") {
 &set_label("12rounds",16);
 	&movq		("xmm2",&QWP(16,"eax"));	# remaining 1/3 of *userKey
 	&mov		($rounds,11);
-	&$movekey	(&QWP(-16,$key),"xmm0")		# round 0
+	&$movekey	(&QWP(-16,$key),"xmm0");	# round 0
 	&aeskeygenassist("xmm1","xmm2",0x01);		# round 1,2
 	&call		(&label("key_192a_cold"));
 	&aeskeygenassist("xmm1","xmm2",0x02);		# round 2,3
@@ -2152,7 +2152,7 @@ if ($PREFIX eq "aesni") {
 	&mov	($key,&wparam(2));
 	&call	("_aesni_set_encrypt_key");
 	&mov	($key,&wparam(2));
-	&shl	($rounds,4)	# rounds-1 after _aesni_set_encrypt_key
+	&shl	($rounds,4);	# rounds-1 after _aesni_set_encrypt_key
 	&test	("eax","eax");
 	&jnz	(&label("dec_key_ret"));
 	&lea	("eax",&DWP(16,$key,$rounds));	# end of key schedule
diff --git a/crypto/camellia/asm/cmll-x86_64.pl b/crypto/camellia/asm/cmll-x86_64.pl
index 76955e4726..28683ce453 100644
--- a/crypto/camellia/asm/cmll-x86_64.pl
+++ b/crypto/camellia/asm/cmll-x86_64.pl
@@ -71,7 +71,7 @@ my $i=@_[0];
 my $seed=defined(@_[1])?@_[1]:0;
 my $scale=$seed<0?-8:8;
 my $j=($i&1)*2;
-my $s0=@S[($j)%4],$s1=@S[($j+1)%4],$s2=@S[($j+2)%4],$s3=@S[($j+3)%4];
+my ($s0,$s1,$s2,$s3)=(@S[($j)%4],@S[($j+1)%4],@S[($j+2)%4],@S[($j+3)%4]);
 
 $code.=<<___;
 	xor	$s0,$t0				# t0^=key[0]
@@ -408,7 +408,7 @@ Camellia_Ekeygen:
 	push	%r15
 .Lkey_prologue:
 
-	mov	%rdi,$keyend		# put away arguments, keyBitLength
+	mov	%edi,${keyend}d		# put away arguments, keyBitLength
 	mov	%rdx,$out		# keyTable
 
 	mov	0(%rsi),@S[0]		# load 0-127 bits
diff --git a/crypto/modes/asm/ghash-x86.pl b/crypto/modes/asm/ghash-x86.pl
index 2a1819cb51..25a16a355b 100644
--- a/crypto/modes/asm/ghash-x86.pl
+++ b/crypto/modes/asm/ghash-x86.pl
@@ -635,7 +635,7 @@ sub mmx_loop() {
     { my @lo  = ("mm0","mm1","mm2");
       my @hi  = ("mm3","mm4","mm5");
       my @tmp = ("mm6","mm7");
-      my $off1=0,$off2=0,$i;
+      my ($off1,$off2,$i) = (0,0,);
 
       &add	($Htbl,128);			# optimize for size
       &lea	("edi",&DWP(16+128,"esp"));
@@ -883,7 +883,7 @@ sub reduction_alg9 {	# 17/13 times faster than Intel version
 my ($Xhi,$Xi) = @_;
 
 	# 1st phase
-	&movdqa		($T1,$Xi)		#
+	&movdqa		($T1,$Xi);		#
 	&psllq		($Xi,1);
 	&pxor		($Xi,$T1);		#
 	&psllq		($Xi,5);		#
@@ -1019,7 +1019,7 @@ my ($Xhi,$Xi) = @_;
 	&movdqa		($Xhn,$Xn);
 	 &pxor		($Xhi,$T1);		# "Ii+Xi", consume early
 
-	  &movdqa	($T1,$Xi)		#&reduction_alg9($Xhi,$Xi); 1st phase
+	  &movdqa	($T1,$Xi);		#&reduction_alg9($Xhi,$Xi); 1st phase
 	  &psllq	($Xi,1);
 	  &pxor		($Xi,$T1);		#
 	  &psllq	($Xi,5);		#
diff --git a/crypto/perlasm/cbc.pl b/crypto/perlasm/cbc.pl
index 6fc2510905..24561e759a 100644
--- a/crypto/perlasm/cbc.pl
+++ b/crypto/perlasm/cbc.pl
@@ -150,7 +150,7 @@ sub cbc
 &set_label("PIC_point");
 	&blindpop("edx");
 	&lea("ecx",&DWP(&label("cbc_enc_jmp_table")."-".&label("PIC_point"),"edx"));
-	&mov($count,&DWP(0,"ecx",$count,4))
+	&mov($count,&DWP(0,"ecx",$count,4));
 	&add($count,"edx");
 	&xor("ecx","ecx");
 	&xor("edx","edx");
diff --git a/crypto/perlasm/x86gas.pl b/crypto/perlasm/x86gas.pl
index 682a3a3163..4b8786bf42 100644
--- a/crypto/perlasm/x86gas.pl
+++ b/crypto/perlasm/x86gas.pl
@@ -170,10 +170,9 @@ sub ::data_short{   push(@out,".value\t".join(',',@_)."\n");  }
 sub ::data_word {   push(@out,".long\t".join(',',@_)."\n");   }
 
 sub ::align
-{ my $val=$_[0],$p2,$i;
+{ my $val=$_[0];
     if ($::aout)
-    {	for ($p2=0;$val!=0;$val>>=1) { $p2++; }
-	$val=$p2-1;
+    {	$val=int(log($val)/log(2));
 	$val.=",0x90";
     }
     push(@out,".align\t$val\n");
diff --git a/crypto/sha/asm/sha1-ia64.pl b/crypto/sha/asm/sha1-ia64.pl
index db28f0805a..02d35d1614 100644
--- a/crypto/sha/asm/sha1-ia64.pl
+++ b/crypto/sha/asm/sha1-ia64.pl
@@ -271,7 +271,8 @@ tmp6=loc13;
 
 ___
 
-{ my $i,@V=($A,$B,$C,$D,$E);
+{ my $i;
+  my @V=($A,$B,$C,$D,$E);
 
 	for($i=0;$i<16;$i++)	{ &BODY_00_15(\$code,$i,@V); unshift(@V,pop(@V)); }
 	for(;$i<20;$i++)	{ &BODY_16_19(\$code,$i,@V); unshift(@V,pop(@V)); }
diff --git a/crypto/sha/asm/sha1-sparcv9a.pl b/crypto/sha/asm/sha1-sparcv9a.pl
index 85e8d68086..e65291bbd9 100644
--- a/crypto/sha/asm/sha1-sparcv9a.pl
+++ b/crypto/sha/asm/sha1-sparcv9a.pl
@@ -549,7 +549,7 @@ ___
 # programmer detect if current CPU is VIS capable at run-time.
 sub unvis {
 my ($mnemonic,$rs1,$rs2,$rd)=@_;
-my $ref,$opf;
+my ($ref,$opf);
 my %visopf = (	"fmul8ulx16"	=> 0x037,
 		"faligndata"	=> 0x048,
 		"fpadd32"	=> 0x052,
diff --git a/crypto/sha/asm/sha512-586.pl b/crypto/sha/asm/sha512-586.pl
index 5b9f3337ad..7eab6a5b88 100644
--- a/crypto/sha/asm/sha512-586.pl
+++ b/crypto/sha/asm/sha512-586.pl
@@ -142,9 +142,9 @@ sub BODY_00_15_x86 {
 	&mov	("edx",$Ehi);
 	&mov	("esi","ecx");
 
-	&shr	("ecx",9)	# lo>>9
+	&shr	("ecx",9);	# lo>>9
 	&mov	("edi","edx");
-	&shr	("edx",9)	# hi>>9
+	&shr	("edx",9);	# hi>>9
 	&mov	("ebx","ecx");
 	&shl	("esi",14);	# lo<<14
 	&mov	("eax","edx");
@@ -207,9 +207,9 @@ sub BODY_00_15_x86 {
 	&mov	($Dhi,"ebx");
 	&mov	("esi","ecx");
 
-	&shr	("ecx",2)	# lo>>2
+	&shr	("ecx",2);	# lo>>2
 	&mov	("edi","edx");
-	&shr	("edx",2)	# hi>>2
+	&shr	("edx",2);	# hi>>2
 	&mov	("ebx","ecx");
 	&shl	("esi",4);	# lo<<4
 	&mov	("eax","edx");
@@ -452,9 +452,9 @@ if ($sse2) {
 	&mov	("edx",&DWP(8*(9+15+16-1)+4,"esp"));
 	&mov	("esi","ecx");
 
-	&shr	("ecx",1)	# lo>>1
+	&shr	("ecx",1);	# lo>>1
 	&mov	("edi","edx");
-	&shr	("edx",1)	# hi>>1
+	&shr	("edx",1);	# hi>>1
 	&mov	("eax","ecx");
 	&shl	("esi",24);	# lo<<24
 	&mov	("ebx","edx");
@@ -488,9 +488,9 @@ if ($sse2) {
 	&mov	("edx",&DWP(8*(9+15+16-14)+4,"esp"));
 	&mov	("esi","ecx");
 
-	&shr	("ecx",6)	# lo>>6
+	&shr	("ecx",6);	# lo>>6
 	&mov	("edi","edx");
-	&shr	("edx",6)	# hi>>6
+	&shr	("edx",6);	# hi>>6
 	&mov	("eax","ecx");
 	&shl	("esi",3);	# lo<<3
 	&mov	("ebx","edx");
diff --git a/crypto/whrlpool/asm/wp-mmx.pl b/crypto/whrlpool/asm/wp-mmx.pl
index 32cf16380b..cb2381c22b 100644
--- a/crypto/whrlpool/asm/wp-mmx.pl
+++ b/crypto/whrlpool/asm/wp-mmx.pl
@@ -119,7 +119,7 @@ $tbl="ebp";
 	&mov	("eax",&DWP(0,"esp"));
 	&mov	("ebx",&DWP(4,"esp"));
 for($i=0;$i<8;$i++) {
-    my $func = ($i==0)? movq : pxor;
+    my $func = ($i==0)? \&movq : \&pxor;
 	&movb	(&LB("ecx"),&LB("eax"));
 	&movb	(&LB("edx"),&HB("eax"));
 	&scale	("esi","ecx");
diff --git a/crypto/x86cpuid.pl b/crypto/x86cpuid.pl
index a1285b9d00..808049a17d 100644
--- a/crypto/x86cpuid.pl
+++ b/crypto/x86cpuid.pl
@@ -165,7 +165,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
 	&jnz	(&label("nohalt"));	# not enough privileges
 
 	&pushf	();
-	&pop	("eax")
+	&pop	("eax");
 	&bt	("eax",9);
 	&jnc	(&label("nohalt"));	# interrupts are disabled
 
@@ -196,7 +196,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
 
 &function_begin_B("OPENSSL_far_spin");
 	&pushf	();
-	&pop	("eax")
+	&pop	("eax");
 	&bt	("eax",9);
 	&jnc	(&label("nospin"));	# interrupts are disabled
 
@@ -280,7 +280,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
 #	arguments is 1 or 2!
 &function_begin_B("OPENSSL_indirect_call");
 	{
-	my $i,$max=7;		# $max has to be chosen as 4*n-1
+	my ($max,$i)=(7,);	# $max has to be chosen as 4*n-1
 				# in order to preserve eventual
 				# stack alignment
 	&push	("ebp");