If you're using YJIT in production, please share your success stories with us!
If you wish to learn more about the approach taken, here are some conference talks and publications: - RubyKaigi 2023 keynote: [Optimizing YJIT’s Performance, from Inception to Production](https://www.youtube.com/watch?v=X0JRhh8w_4I) - RubyKaigi 2023 keynote: [Fitting Rust YJIT into CRuby](https://www.youtube.com/watch?v=GI7vvAgP_Qs) - RubyKaigi 2022 keynote: [Stories from developing YJIT](https://www.youtube.com/watch?v=EMchdR9C8XM) - RubyKaigi 2022 talk: [Building a Lightweight IR and Backend for YJIT](https://www.youtube.com/watch?v=BbLGqTxTRp0) - RubyKaigi 2021 talk: [YJIT: Building a New JIT Compiler Inside CRuby](https://www.youtube.com/watch?v=PBVLf3yfMs8) - Blog post: [YJIT: Building a New JIT Compiler Inside CRuby](https://pointersgonewild.com/2021/06/02/yjit-building-a-new-jit-compiler-inside-cruby/) - MPLR 2023 paper: [Evaluating YJIT’s Performance in a Production Context: A Pragmatic Approach](https://dl.acm.org/doi/10.1145/3617651.3622982) - VMIL 2021 paper: [YJIT: A Basic Block Versioning JIT Compiler for CRuby](https://dl.acm.org/doi/10.1145/3486606.3486781) - MoreVMs 2021 talk: [YJIT: Building a New JIT Compiler Inside CRuby](https://www.youtube.com/watch?v=vucLAqv7qpc) - ECOOP 2016 talk: [Interprocedural Type Specialization of JavaScript Programs Without Type Analysis](https://www.youtube.com/watch?v=sRNBY7Ss97A) - ECOOP 2016 paper: [Interprocedural Type Specialization of JavaScript Programs Without Type Analysis](https://drops.dagstuhl.de/opus/volltexte/2016/6101/pdf/LIPIcs-ECOOP-2016-7.pdf) - ECOOP 2015 talk: [Simple and Effective Type Check Removal through Lazy Basic Block Versioning](https://www.youtube.com/watch?v=S-aHBuoiYE0) - ECOOP 2015 paper: [Simple and Effective Type Check Removal through Lazy Basic Block Versioning](https://arxiv.org/pdf/1411.0352.pdf) To cite YJIT in your publications, please cite the MPLR 2023 paper: ``` @inproceedings{yjit_mplr_2023, author = {Chevalier-Boisvert, Maxime and Kokubun, Takashi and Gibbs, Noah and Wu, Si Xing (Alan) and Patterson, Aaron and Issroff, Jemma}, title = {Evaluating YJIT’s Performance in a Production Context: A Pragmatic Approach}, year = {2023}, isbn = {9798400703805}, publisher = {Association for Computing Machinery}, address = {New York, NY, USA}, url = {https://doi.org/10.1145/3617651.3622982}, doi = {10.1145/3617651.3622982}, booktitle = {Proceedings of the 20th ACM SIGPLAN International Conference on Managed Programming Languages and Runtimes}, pages = {20–33}, numpages = {14}, keywords = {dynamically typed, optimization, just-in-time, virtual machine, ruby, compiler, bytecode}, location = {Cascais, Portugal}, series = {MPLR 2023} } ``` ## Current Limitations YJIT may not be suitable for certain applications. It currently only supports macOS, Linux and BSD on x86-64 and arm64/aarch64 CPUs. YJIT will use more memory than the Ruby interpreter because the JIT compiler needs to generate machine code in memory and maintain additional state information. You can change how much executable memory is allocated using [YJIT's command-line options](#command-line-options). ## Installation ### Requirements You will need to install: - A C compiler such as GCC or Clang - GNU Make and Autoconf - The Rust compiler `rustc` and Cargo (if you want to build in dev/debug mode) - The Rust version must be [>= 1.58.0](../../yjit/Cargo.toml). To install the Rust build toolchain, we suggest following the [recommended installation method][rust-install]. Rust also provides first class [support][editor-tools] for many source code editors. [rust-install]: https://www.rust-lang.org/tools/install [editor-tools]: https://www.rust-lang.org/tools ### Building YJIT Start by cloning the `ruby/ruby` repository: ```sh git clone https://github.com/ruby/ruby yjit cd yjit ``` The YJIT `ruby` binary can be built with either GCC or Clang. It can be built either in dev (debug) mode or in release mode. For maximum performance, compile YJIT in release mode with GCC. More detailed build instructions are provided in the [Ruby README](https://github.com/ruby/ruby#how-to-build). ```sh # Configure in release mode for maximum performance, build and install ./autogen.sh ./configure --enable-yjit --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc make -j && make install ``` or ```sh # Configure in lower-performance dev (debug) mode for development, build and install ./autogen.sh ./configure --enable-yjit=dev --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc make -j && make install ``` Dev mode includes extended YJIT statistics, but can be slow. For only statistics you can configure in stats mode: ```sh # Configure in extended-stats mode without slow runtime checks, build and install ./autogen.sh ./configure --enable-yjit=stats --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc make -j && make install ``` On macOS, you may need to specify where to find some libraries: ```sh # Install dependencies brew install openssl libyaml # Configure in dev (debug) mode for development, build and install ./autogen.sh ./configure --enable-yjit=dev --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc --with-opt-dir="$(brew --prefix openssl):$(brew --prefix readline):$(brew --prefix libyaml)" make -j && make install ``` Typically configure will choose the default C compiler. To specify the C compiler, use ```sh # Choosing a specific c compiler export CC=/path/to/my/chosen/c/compiler ``` before running `./configure`. You can test that YJIT works correctly by running: ```sh # Quick tests found in /bootstraptest make btest # Complete set of tests make -j test-all ``` ## Usage ### Examples Once YJIT is built, you can either use `./miniruby` from within your build directory, or switch to the YJIT version of `ruby` by using the `chruby` tool: ```sh chruby ruby-yjit ruby myscript.rb ``` You can dump statistics about compilation and execution by running YJIT with the `--yjit-stats` command-line option: ```sh ./miniruby --yjit-stats myscript.rb ``` The machine code generated for a given method can be printed by adding `puts RubyVM::YJIT.disasm(method(:method_name))` to a Ruby script. Note that no code will be generated if the method is not compiled. ### Command-Line Options YJIT supports all command-line options supported by upstream CRuby, but also adds a few YJIT-specific options: - `--yjit`: enable YJIT (disabled by default) - `--yjit-call-threshold=N`: number of calls after which YJIT begins to compile a function (default 30) - `--yjit-cold-threshold=N`: number of global calls after which an ISEQ is considered cold and not compiled, lower values mean less code is compiled (default 200K) - `--yjit-exec-mem-size=N`: size of the executable memory block to allocate, in MiB (default 64 MiB) - `--yjit-code-gc`: enable code GC (disabled by default as of Ruby 3.3) - `--yjit-stats`: print statistics after the execution of a program (incurs a run-time cost) - `--yjit-stats=quiet`: gather statistics while running a program but don't print them. Stats are accessible through `RubyVM::YJIT.runtime_stats`. (incurs a run-time cost) - `--yjit-trace-exits`: produce a Marshal dump of backtraces from specific exits. Automatically enables `--yjit-stats` - `--yjit-perf`: Enable frame pointers and profiling with the `perf` tool Note that there is also an environment variable `RUBY_YJIT_ENABLE` which can be used to enable YJIT. This can be useful for some deployment scripts where specifying an extra command-line option to Ruby is not practical. You can also enable YJIT at run-time using `RubyVM::YJIT.enable`. This can allow you to enable YJIT after your application is done booting, which makes it possible to avoid compiling any initialization code. You can verify that YJIT is enabled using `RubyVM::YJIT.enabled?` or by checking that `ruby --yjit -v` includes the string `+YJIT`: ```sh ruby --yjit -v ruby 3.3.0dev (2023-01-31T15:11:10Z master 2a0bf269c9) +YJIT dev [x86_64-darwin22] ruby --yjit -e "p RubyVM::YJIT.enabled?" true ruby -e "RubyVM::YJIT.enable; p RubyVM::YJIT.enabled?" true ``` ### Benchmarking We have collected a set of benchmarks and implemented a simple benchmarking harness in the [yjit-bench](https://github.com/Shopify/yjit-bench) repository. This benchmarking harness is designed to disable CPU frequency scaling, set process affinity and disable address space randomization so that the variance between benchmarking runs will be as small as possible. ## Performance Tips for Production Deployments While YJIT options default to what we think would work well for most workloads, they might not necessarily be the best configuration for your application. This section covers tips on improving YJIT performance in case YJIT does not speed up your application in production. ### Increasing --yjit-exec-mem-size When JIT code size (`RubyVM::YJIT.runtime_stats[:code_region_size]`) reaches this value, YJIT stops compiling new code. Increasing the executable memory size means more code can be optimized by YJIT, at the cost of more memory usage. Alternatively, you can enable `--yjit-code-gc`, which will cause all machine code to be discarded when the executable memory size limit is hit, meaning JIT compilation will then start over. This can allow you to use a lower executable memory size limit, but may cause a slight drop in performance when the limit is hit. Compiling code takes some time, so scheduling code GC too frequently slows down your application. Increasing `--yjit-exec-mem-size` may speed up your application if `RubyVM::YJIT.runtime_stats[:code_gc_count]` is not 0 or 1. ### Running workers as long as possible It's helpful to call the same code as many times as possible before a process restarts. If a process is killed too frequently, the time taken for compiling methods may outweigh the speedup obtained by compiling them. You should monitor the number of requests each process has served. If you're periodically killing worker processes, e.g. with `unicorn-worker-killer` or `puma_worker_killer`, you may want to reduce the killing frequency or increase the limit. ## Reducing YJIT Memory Usage YJIT allocates memory for JIT code and metadata. Enabling YJIT generally results in more memory usage. This section goes over tips on minimizing YJIT memory usage in case it uses more than your capacity. ### Increasing --yjit-call-threshold As of Ruby 3.2, `--yjit-call-threshold` defaults to 30. With this default, some applications end up compiling methods that are used only during the application boot. Increasing this option may help you reduce the size of JIT code and metadata. It's worth trying different values like `--yjit-call-threshold=100`. Note that increasing the value too much may result in compiling code too late. You should monitor how many requests each worker processes before it's restarted. For example, if each process only handles 1000 requests, `--yjit-call-threshold=1000` might be too large for your application. ### Decreasing --yjit-exec-mem-size The `--yjit-exec-mem-size` option specifies the JIT code size, but YJIT also uses memory for its metadata, which often consumes more memory than JIT code. Generally, YJIT adds memory overhead by roughly 3-4x of `--yjit-exec-mem-size` in production as of Ruby 3.2. You should multiply that by the number of worker processes to estimate the worst case memory overhead. Running code GC adds overhead, but it could be still faster than recovering from a whole process killed by OOM. ## Code Optimization Tips This section contains tips on writing Ruby code that will run as fast as possible on YJIT. Some of this advice is based on current limitations of YJIT, while other advice is broadly applicable. It probably won't be practical to apply these tips everywhere in your codebase. You should ideally start by profiling your application using a tool such as [stackprof](https://github.com/tmm1/stackprof) so that you can determine which methods make up most of the execution time. You can then refactor the specific methods that make up the largest fractions of the execution time. We do not recommend modifying your entire codebase based on the current limitations of YJIT. - Avoid using `OpenStruct` - Avoid redefining basic integer operations (i.e. +, -, <, >, etc.) - Avoid redefining the meaning of `nil`, equality, etc. - Avoid allocating objects in the hot parts of your code - Minimize layers of indirection - Avoid classes that wrap objects if you can - Avoid methods that just call another method, trivial one-liner methods - Try to write code so that the same variables always have the same type - Use `while` loops if you can, instead of C methods like `Array#each` - This is not idiomatic Ruby, but could help in hot methods - CRuby method calls are costly. Avoid things such as methods that only return a value from a hash or return a constant. You can also use the `--yjit-stats` command-line option to see which bytecodes cause YJIT to exit, and refactor your code to avoid using these instructions in the hottest methods of your code. ### Other Statistics If you run `ruby` with `--yjit-stats`, YJIT will track and return performance statistics in `RubyVM::YJIT.runtime_stats`. ```rb $ RUBYOPT="--yjit-stats" irb irb(main):001:0> RubyVM::YJIT.runtime_stats => {:inline_code_size=>340745, :outlined_code_size=>297664, :all_stats=>true, :yjit_insns_count=>1547816, :send_callsite_not_simple=>7267, :send_kw_splat=>7, :send_ivar_set_method=>72, ... ``` Some of the counters include: * :yjit_insns_count - how many Ruby bytecode instructions have been executed * :binding_allocations - number of bindings allocated * :binding_set - number of variables set via a binding * :code_gc_count - number of garbage collections of compiled code since process start * :vm_insns_count - number of instructions executed by the Ruby interpreter * :compiled_iseq_count - number of bytecode sequences compiled * :inline_code_size - size in bytes of compiled YJIT blocks * :outline_code_size - size in bytes of YJIT error-handling compiled code * :side_exit_count - number of side exits taken at runtime * :total_exit_count - number of exits, including side exits, taken at runtime * :avg_len_in_yjit - avg. number of instructions in compiled blocks before exiting to interpreter Counters starting with "exit_" show reasons for YJIT code taking a side exit (return to the interpreter.) Performance counter names are not guaranteed to remain the same between Ruby versions. If you're curious what each counter means, it's usually best to search the source code for it — but it may change in a later Ruby version. The printed text after a `--yjit-stats` run includes other information that may be named differently than the information in `RubyVM::YJIT.runtime_stats`. ## Contributing We welcome open source contributions. You should feel free to open new issues to report bugs or just to ask questions. Suggestions on how to make this readme file more helpful for new contributors are most welcome. Bug fixes and bug reports are very valuable to us. If you find a bug in YJIT, it's very possible be that nobody has reported it before, or that we don't have a good reproduction for it, so please open an issue and provide as much information as you can about your configuration and a description of how you encountered the problem. List the commands you used to run YJIT so that we can easily reproduce the issue on our end and investigate it. If you are able to produce a small program reproducing the error to help us track it down, that is very much appreciated as well. If you would like to contribute a large patch to YJIT, we suggest opening an issue or a discussion on the [Shopify/ruby repository](https://github.com/Shopify/ruby/issues) so that we can have an active discussion. A common problem is that sometimes people submit large pull requests to open source projects without prior communication, and we have to reject them because the work they implemented does not fit within the design of the project. We want to save you time and frustration, so please reach out so we can have a productive discussion as to how you can contribute patches we will want to merge into YJIT. ### Source Code Organization The YJIT source code is divided between: - `yjit.c`: code YJIT uses to interface with the rest of CRuby - `yjit.h`: C definitions YJIT exposes to the rest of the CRuby - `yjit.rb`: `YJIT` Ruby module that is exposed to Ruby - `yjit/src/asm/*`: in-memory assembler we use to generate machine code - `yjit/src/codegen.rs`: logic for translating Ruby bytecode to machine code - `yjit/src/core.rb`: basic block versioning logic, core structure of YJIT - `yjit/src/stats.rs`: gathering of run-time statistics - `yjit/src/options.rs`: handling of command-line options - `yjit/src/cruby.rs`: C bindings manually exposed to the Rust codebase - `yjit/bindgen/src/main.rs`: C bindings exposed to the Rust codebase through bindgen The core of CRuby's interpreter logic is found in: - `insns.def`: defines Ruby's bytecode instructions (gets compiled into `vm.inc`) - `vm_insnshelper.c`: logic used by Ruby's bytecode instructions - `vm_exec.c`: Ruby interpreter loop ### Generating C bindings with bindgen In order to expose C functions to the Rust codebase, you will need to generate C bindings: ```sh CC=clang ./configure --enable-yjit=dev make -j yjit-bindgen ``` This uses the bindgen tools to generate/update `yjit/src/cruby_bindings.inc.rs` based on the bindings listed in `yjit/bindgen/src/main.rs`. Avoid manually editing this file as it could be automatically regenerated at a later time. If you need to manually add C bindings, add them to `yjit/cruby.rs` instead. ### Coding & Debugging Protips There are multiple test suites: - `make btest` (see `/bootstraptest`) - `make test-all` - `make test-spec` - `make check` runs all of the above - `make yjit-smoke-test` runs quick checks to see that YJIT is working correctly The tests can be run in parallel like this: ```sh make -j test-all RUN_OPTS="--yjit-call-threshold=1" ``` Or single-threaded like this, to more easily identify which specific test is failing: ```sh make test-all TESTOPTS=--verbose RUN_OPTS="--yjit-call-threshold=1" ``` To debug a single test in `test-all`: ```sh make test-all TESTS='test/-ext-/marshal/test_usrmarshal.rb' RUNRUBYOPT=--debugger=lldb RUN_OPTS="--yjit-call-threshold=1" ``` You can also run one specific test in `btest`: ```sh make btest BTESTS=bootstraptest/test_ractor.rb RUN_OPTS="--yjit-call-threshold=1" ``` There are shortcuts to run/debug your own test/repro in `test.rb`: ```sh make run # runs ./miniruby test.rb make lldb # launches ./miniruby test.rb in lldb ``` You can use the Intel syntax for disassembly in LLDB, keeping it consistent with YJIT's disassembly: ```sh echo "settings set target.x86-disassembly-flavor intel" >> ~/.lldbinit ``` ## Running x86 YJIT on Apple's Rosetta For development purposes, it is possible to run x86 YJIT on an Apple M1 via Rosetta. You can find basic instructions below, but there are a few caveats listed further down. First, install Rosetta: ```sh $ softwareupdate --install-rosetta ``` Now any command can be run with Rosetta via the `arch` command line tool. Then you can start your shell in an x86 environment: ```sh $ arch -x86_64 zsh ``` You can double check your current architecture via the `arch` command: ```sh $ arch -x86_64 zsh $ arch i386 ``` You may need to set the default target for `rustc` to x86-64, e.g. ```sh $ rustup default stable-x86_64-apple-darwin ``` While in your i386 shell, install Cargo and Homebrew, then hack away! ### Rosetta Caveats 1. You must install a version of Homebrew for each architecture 2. Cargo will install in $HOME/.cargo by default, and I don't know a good way to change architectures after install If you use Fish shell you can [read this link](https://tenderlovemaking.com/2022/01/07/homebrew-rosetta-and-ruby.html) for information on making the dev environment easier. ## Profiling with Linux perf `--yjit-perf` allows you to profile JIT-ed methods along with other native functions using Linux perf. When you run Ruby with `perf record`, perf looks up `/tmp/perf-{pid}.map` to resolve symbols in JIT code, and this option lets YJIT write method symbols into that file as well as enabling frame pointers. Here's an example way to use this option with [Firefox Profiler](https://profiler.firefox.com) (See also: [Profiling with Linux perf](https://profiler.firefox.com/docs/#/./guide-perf-profiling)): ```bash # Compile the interpreter with frame pointers enabled ./configure --enable-yjit --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc cflags=-fno-omit-frame-pointer make -j && make install # [Optional] Allow running perf without sudo echo 0 | sudo tee /proc/sys/kernel/kptr_restrict echo -1 | sudo tee /proc/sys/kernel/perf_event_paranoid # Profile Ruby with --yjit-perf cd ../yjit-bench perf record --call-graph fp -- ruby --yjit-perf -Iharness-perf benchmarks/liquid-render/benchmark.rb # View results on Firefox Profiler https://profiler.firefox.com. # Create /tmp/test.perf as below and upload it using "Load a profile from file". perf script --fields +pid > /tmp/test.perf ```